Default title

With this in brain we resolved to examination the Dahua IP Community digital camera, which is one more camera in the phase of smaller IR bullet cameras.

This is a two mega-pixel camera with a 1/1.7” 12Megapixel progressive scan CMOS, which develop sharp and crisp pictures excellent sufficient for most conditions. It will come with a four.1mm ~16.4mm motorized lens, which is what we employed in our assessment and vehicle ajust focal duration.

According to Dahua the highest IR duration is 50m which may be about appropriate ( it is by no means uncomplicated to measure that) but where we tested out this camera we only have about 45m in advance of the highway, and I assume that is about the greatest length if you want to be able to see any details in the recording.

We’ll talk more about this later on, for now here’s the characteristics of the digital camera at a glance:

>1/one.7” 12Megapixel progressive scan CMOS
>Support H.264&MJPEG dual codec
>Max 15fps@12Mp(4000×3000),25/30fps@4K(3840×2160)
>DWDR,Working day/Night(ICR), 3DNR, AWB, AGC, BLC
>Multiple network checking: World-wide-web viewer, CMS(DSS/PSS) & DMSS
>4.1mm ~16.4mm motorized lens
>Max. IR LEDs Duration 50m
>IP67, PoE

The setting up procedure need to be reasonably easy to do, even for the inexperienced. I will consider to explain how to get this digicam up and jogging. Very first join the camera to your router, after that you require to use a configuration instrument to adjust the DAHUA IPC-HFW81200E-Z,IPC-HFW81200E-Z:[93],motoried Len IP camera,DAHUA IP Camera,4K IP camera:[7] default IP address with one particular that will perform with your network.

To do this open up up the involved CD and open the folder named “Tools” then “Config tools” and inside of there must be two files, just one instruction guide and a single .rar file. Unpack the .rar file and run the ConfigTool.exe file.

application provided dahua ip digicam

Push refresh and the software program will locate your digital camera and enable you to modify the IP handle. Remember that the default password and user-identify is admin, you will need to change this later on – for safety causes – to some thing unforgettable. You can also change PPOE from in this article.

configtool

When you have accomplished the over actions you need to now be in a position to accessibility the digital camera by typing your IP tackle into your browser. Log in with “Admin” as each the consumer-identify and password. Now you can transform any options you want for the digicam.

dahua world-wide-web interface

Go to set-up menu and in this article you can do any adjustments you want. There are a few various pre-established profiles “Day”, “Night” and “Auto”. By default every thing is set at automobile and brightness, distinction, saturation and sharpness are all set to a benefit of fifty.

Enjoy all over with the configurations in this article for each working day and night time to see which presents you the finest picture high quality. Daytime will work high-quality with all options at default but for evening time you may need to tweak it a very little to locate the greatest options for your situations.

Leave a Reply